I-report desing issue

[dhavalpatel_m]

Hi,

Greetings.

I have one question regarding the I-report design. Please find my report desing image in 'Image1.jpg'.

The problem is when there is much data in the last table columns (Ex: TestCase or Objective etc.) it transfers the data into the second page and it looks bit bad.

Can i get some way to keep data in one page and if limit exceeds then and then it transfer the data into the second page.

Let me know if anyone has some good work around or solution for this. Your help will be appreciated.

Let me know If any doubt or having problem in problem understading. I'll write in more details. thanks.

-D

 

[lisacbeaton]

Code:

Hi,



In iReport's Report Inspector tab, right click on the name of your report to open up the properties window. Scroll down to "Ignore pagination" and check that box. That might be what you want.



Best,

Lisa

[cmatthews]

 Another tip on this is in the band properties, "Split Allowed" will have impact on this sort of need. Sometimes the impact is desired sometimes not. There are several ways of making the output on page contain what you want. Report groups and band properties both have options which will help you control this.

[dhavalpatel_m]

Thanks Lisa.. This helps. It removes all the pagination and put all the record in one big page.

Still printing this report is also an issue. Any thoughs on that ?

Post Edited by dhavalpatel_m at 07/24/2012 07:04