2005 IR Help

September 12, 2006

September 3, 2006

By: Gunny99 - gunny99

Setting a chart's range??

2005-10-07 07:00

My report has several charts based upon a dataset of server performance monitors and each chart (e.g.: CPU utilization) has it's own range. I need to be able to set these to a fixed 0-100.

Is it possible to manually set the range on a chart?

By: bill - rx7haze

RE: Setting a chart's range??

2006-05-25 09:52

I too am trying to adjust the range on the value axis. If you do a search on this topic you'll notice there is never an answer for this question. Someone out there must know how to set this as I've seen plenty of samples that appear to have been modified. I'm assuming it can't be done in the GUI but there must be a way to modify the jrxml file. I don't know much about java programming but if you look at the JFreeChart API it looks possible.

By: bill - rx7haze

RE: Setting a chart's range??

2006-05-26 14:17

I've lost track of how many hours I've spent trying to figure this out. It looks like setting the range is possible by using the Customizer class in the chart properties. I've seen it stated that this can open up the entire JFreeChart API to iReport. I found a sample of a customizer class located in the jasper reports download in the location jasperreports-1.2.2demosampleschartsbarchartcustomizer.java. This all makes sense to me but now I can't figure out how to reference the customizer class. I tried setting the classpath to reference the directory...that didn't work. I tried putting it in the lib directory of iReport...that didn't work. Finally I tried putting it in the same directory as the report...that didn't work. This is the only thing holding me back from using iReport as my total reporting solution.

Thanks.

By: bill - rx7haze

RE: Setting a chart's range??

2006-05-26 15:16

Forgot to post in previous message. Here's the error I get.

Error filling print...

java.lang.ClassNotFoundException: BarChartCustomizer at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClassInternal(Unknown Source) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Unknown Source) at net.sf.jasperreports.engine.util.JRClassLoader.loadClassForName(JRClassLoader.java:90) at net.sf.jasperreports.engine.fill.JRFillChart.<init>(JRFillChart.java:260) at net.sf.jasperreports.engine.fill.JRFillObjectFactory.getChart(JRFillObjectFactory.java:551) at net.sf.jasperreports.engine.base.JRBaseChart.getCopy(JRBaseChart.java:470) at net.sf.jasperreports.engine.fill.JRFillElementGroup.<init>(JRFillElementGroup.java:88) at net.sf.jasperreports.engine.fill.JRFillElementContainer.<init>(JRFillElementContainer.java:88) at net.sf.jasperreports.engine.fill.JRFillBand.<init>(JRFillBand.java:77) at net.sf.jasperreports.engine.fill.JRFillObjectFactory.getBand(JRFillObjectFactory.java:374) at net.sf.jasperreports.engine.fill.JRFillGroup.<init>(JRFillGroup.java:76) at net.sf.jasperreports.engine.fill.JRFillObjectFactory.getGroup(JRFillObjectFactory.java:353) at net.sf.jasperreports.engine.fill.JRFillVariable.<init>(JRFillVariable.java:83) at net.sf.jasperreports.engine.fill.JRFillObjectFactory.getVariable(JRFillObjectFactory.java:333) at net.sf.jasperreports.engine.fill.JRFillDataset.addVariable(JRFillDataset.java:275) at net.sf.jasperreports.engine.fill.JRFillDataset.setVariables(JRFillDataset.java:265) at net.sf.jasperreports.engine.fill.JRFillDataset.<init>(JRFillDataset.java:219) at net.sf.jasperreports.engine.fill.JRFillObjectFactory.getDataset(JRFillObjectFactory.java:1032) at net.sf.jasperreports.engine.fill.JRBaseFiller.<init>(JRBaseFiller.java:374) at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:92) at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:74) at net.sf.jasperreports.engine.fill.JRFiller.createFiller(JRFiller.java:147) at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:83) at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:601) at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:517) at it.businesslogic.ireport.IReportCompiler.run(IReportCompiler.java:653) at java.lang.Thread.run(Unknown Source) NESTED BY : java.lang.ClassNotFoundException: BarChartCustomizer at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClassInternal(Unknown Source) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Unknown Source) at net.sf.jasperreports.engine.util.JRClassLoader.loadClassForName(JRClassLoader.java:90) at net.sf.jasperreports.engine.fill.JRFillChart.<init>(JRFillChart.java:260) at net.sf.jasperreports.engine.fill.JRFillObjectFactory.getChart(JRFillObjectFactory.java:551) at net.sf.jasperreports.engine.base.JRBaseChart.getCopy(JRBaseChart.java:470) at net.sf.jasperreports.engine.fill.JRFillElementGroup.<init>(JRFillElementGroup.java:88) at net.sf.jasperreports.engine.fill.JRFillElementContainer.<init>(JRFillElementContainer.java:88) at net.sf.jasperreports.engine.fill.JRFillBand.<init>(JRFillBand.java:77) at net.sf.jasperreports.engine.fill.JRFillObjectFactory.getBand(JRFillObjectFactory.java:374) at net.sf.jasperreports.engine.fill.JRFillGroup.<init>(JRFillGroup.java:76) at net.sf.jasperreports.engine.fill.JRFillObjectFactory.getGroup(JRFillObjectFactory.java:353) at net.sf.jasperreports.engine.fill.JRFillVariable.<init>(JRFillVariable.java:83) at net.sf.jasperreports.engine.fill.JRFillObjectFactory.getVariable(JRFillObjectFactory.java:333) at net.sf.jasperreports.engine.fill.JRFillDataset.addVariable(JRFillDataset.java:275) at net.sf.jasperreports.engine.fill.JRFillDataset.setVariables(JRFillDataset.java:265) at net.sf.jasperreports.engine.fill.JRFillDataset.<init>(JRFillDataset.java:219) at net.sf.jasperreports.engine.fill.JRFillObjectFactory.getDataset(JRFillObjectFactory.java:1032) at net.sf.jasperreports.engine.fill.JRBaseFiller.<init>(JRBaseFiller.java:374) at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:92) at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:74) at net.sf.jasperreports.engine.fill.JRFiller.createFiller(JRFiller.java:147) at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:83) at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:601) at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:517) at it.businesslogic.ireport.IReportCompiler.run(IReportCompiler.java:653) at java.lang.Thread.run(Unknown Source) NESTED BY : net.sf.jasperreports.engine.JRRuntimeException: Could not create chart customizer instance. at net.sf.jasperreports.engine.fill.JRFillChart.<init>(JRFillChart.java:263) at net.sf.jasperreports.engine.fill.JRFillObjectFactory.getChart(JRFillObjectFactory.java:551) at net.sf.jasperreports.engine.base.JRBaseChart.getCopy(JRBaseChart.java:470) at net.sf.jasperreports.engine.fill.JRFillElementGroup.<init>(JRFillElementGroup.java:88) at net.sf.jasperreports.engine.fill.JRFillElementContainer.<init>(JRFillElementContainer.java:88) at net.sf.jasperreports.engine.fill.JRFillBand.<init>(JRFillBand.java:77) at net.sf.jasperreports.engine.fill.JRFillObjectFactory.getBand(JRFillObjectFactory.java:374) at net.sf.jasperreports.engine.fill.JRFillGroup.<init>(JRFillGroup.java:76) at net.sf.jasperreports.engine.fill.JRFillObjectFactory.getGroup(JRFillObjectFactory.java:353) at net.sf.jasperreports.engine.fill.JRFillVariable.<init>(JRFillVariable.java:83) at net.sf.jasperreports.engine.fill.JRFillObjectFactory.getVariable(JRFillObjectFactory.java:333) at net.sf.jasperreports.engine.fill.JRFillDataset.addVariable(JRFillDataset.java:275) at net.sf.jasperreports.engine.fill.JRFillDataset.setVariables(JRFillDataset.java:265) at net.sf.jasperreports.engine.fill.JRFillDataset.<init>(JRFillDataset.java:219) at net.sf.jasperreports.engine.fill.JRFillObjectFactory.getDataset(JRFillObjectFactory.java:1032) at net.sf.jasperreports.engine.fill.JRBaseFiller.<init>(JRBaseFiller.java:374) at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:92) at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:74) at net.sf.jasperreports.engine.fill.JRFiller.createFiller(JRFiller.java:147) at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:83) at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:601) at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:517) at it.businesslogic.ireport.IReportCompiler.run(IReportCompiler.java:653) at java.lang.Thread.run(Unknown Source) Caused by: java.lang.ClassNotFoundException: BarChartCustomizer at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClassInternal(Unknown Source) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Unknown Source) at net.sf.jasperreports.engine.util.JRClassLoader.loadClassForName(JRClassLoader.java:90) at net.sf.jasperreports.engine.fill.JRFillChart.<init>(JRFillChart.java:260) ... 23 more

Print not filled. Try to use an EmptyDataSource...!

By: Fek - fekmfg

RE: Setting a chart's range??

2006-05-12 07:03

Hi,

I have the same problem I need to set the x axis from 0 to 24. Is there no possibility to configure the axis?

Greetings Fek

By: Marcelo Fernandes - mcf-rocha

RE: Setting a chart's range??

2006-05-29 08:46

Hi all!

I want to do the same thing. Have you found the solution?

I know how to do it in JasperReport but not in iReport:

final JFreeChart chart = ChartFactory.createBarChart3D(

"Graph name", // chart title

"Domain name", // domain axis label

"Range name", // range axis label

dataset, // data

PlotOrientation.HORIZONTAL, // orientation

true, // include legend

true, // tooltips

false // urls

);

final CategoryPlot plot = chart.getCategoryPlot();

NumberAxis rangeAxis = (NumberAxis) plot.getRangeAxis();

rangeAxis.setStandardTickUnits(NumberAxis.createIntegerTickUnits());

//Now we set the range, for exemple: from 0 to 5

rangeAxis.setRangeWithMargins(0,5);

Thanks in advance,

Marcelo

By: bill - rx7haze

RE: Setting a chart's range??

2006-05-30 06:17

Someone out there must know how to use the customizer class.

Please help.

Thanks.

September 3, 2006

By: Paul - pxp777

How to design and run report that contain 2 p

2005-10-17 01:52

Hi!

How to design report template that contains two or more different pages in JasperReport. Those pages can contain plain text

(as an example some contract) with a few parameters on any page.

Can I use something like iReport?

Sincerely, Paul

By: mjp - mjplaine

RE: How to design and run report that contain 2 p

2006-05-24 01:49

Paul,

Did you find a solution to this question?

Thanks

Marie-Jo

By: Martyn - martyn-hi-ss-nl

RE: How to design and run report that contain

2006-05-24 13:06

What do you mean by two different pages. If you want 2 different pages you need to design 2 different reports. If you are more specific what you want I can indicate if iReport is something for you.

September 3, 2006

By: Daniel Gaspary - dgaspary

TextField + Parameter + Style - Howto ??

2005-09-25 20:10

Hi, I have the following problem:

I have a TextField and I need to show a text with a Param. The problem is ... the param need to have the bold style.

Textfield Expression is something like:

"Normal text" + <style isBold="true">$P{param1}</style>

How can I do that ?

By: Daniel Gaspary - dgaspary

RE: TextField + Parameter + Style - SOLVE

2005-09-26 18:05

The solution was in the jasperReports StyledText sample:

"Normal text <style isBold="true">" + $P{param1} + "</style> normal text again."

By: Diogo Oliveira - diogosales

RE: TextField + Parameter + Style

2006-05-22 10:42

Thanks, that saved me a lot of precious time ;)

September 3, 2006

By: Scott Carr - kevinscarr

Compiling Report... Never completes

2005-01-25 14:22

I have a message in the Active Threads that states Compiling Report, but it never does anything. I don't see any output show in the directory.

Is there something I am missing?

PS This occurs after I press the Compile Report button... ;-)

By: Giulio Toffoli - gt78

RE: Compiling Report... Never completes

2005-01-26 11:13

iR 0.4.1 supports all kind of java compilers and can solve the problem.

iR 0.4.1 will be out in 2/3 days.

Please note that you can have a loop. Check that bands are not too height.

giulio

By: N Olding - oldingn

RE: Compiling Report... Never completes

2006-04-17 15:20

I am using iReport 1.2.1 on Sun Java 1.5.0_06 and I have this problem too.

What does 'check that bands are not too high' mean?

Are there specific maximum values for each band?

Thanks,

By: N Olding - oldingn

RE: Compiling Report... Never completes

2006-04-17 21:30

Oops, Windows 2000 w/latest patches, I forgot to mention.

By: N Olding - oldingn

RE: Compiling Report... Never completes

2006-04-19 09:16

... and the word 'Solid' appears three times, on separate lines, on the MS-DOS window running iReport.

It turns out that the comiple does finish, with a compilation time of 2,880,000.

By: N Olding - oldingn

RE: Compiling Report... Never completes

2006-04-19 10:20

A fix!

Delete all versions of Java runtime and JDK, and reinstall Java and iReport.

The same report now has a compilation time of 281. This is 10,000 times better.

September 3, 2006

By: andersons - andersons

Barcode Full ASCII character set

2005-12-23 09:30

I am producing 3of9 barcodes that need the full ascii character set. I receive the error of java.lang.RuntimeException: Illegal character - try using extended mode if you need to encode the full ASCII character set at it.businesslogic.ireport.barcode.BcImage.getBarcodeImage().I know that there is an option to do so with barbecue. I was wondering if anyone knew how to set this with iReport or even within the XML code. Thanks in advance.

Susan

By: Rob Karatzas - tutor

RE: Barcode Full ASCII character set

2006-04-18 07:47

having the same issue (with v1.2) Susan

did you ever find a solution for this?

thanks rob

By: Rob Karatzas - tutor

RE: Barcode Full ASCII character set

2006-04-18 07:57

the 'real' issue is having unsupported characters (in my case, these were lowercase characters).

my solution was just to uppercase the inbound data field.

rob

September 3, 2006

By: Lars Hammer - thegrudge

Time Series Chart -a little help needed

2005-12-05 02:55

Hello

I am struggling to get a TimeSeries Chart running in iReport.

I have an SQL-query which returns a long list of timestamps in milis (long).

Now, the problems is, when i look at the Chart Data Details page in iReport, I'm requested to fill out "Series expression", "Time Period expression" and "Value expression" and I can't figure out what to put in these fields.

I've read the devx.com article on ireport/jasperreport and I have successfully created both pie and bar charts, but the TimeSeries chart is killing me.

The manual says nothing hereof :-(

I've been messing around with Report Series, but I cannot seem to get it quite right.

If anyone could provide some hints on creating TimeSeries charts, that would be really helpful.

Thanks in advance!

/Lars Hammer

By: Alan O'Leary - aloleary

RE: Time Series Chart -a little help needed

2006-04-11 04:33

Here here... cannot find any help on this either... a little frustrated... one example of this would help a lot of people !! (including those of us who have paid for the manual !)

By: MaGaM - maganz

RE: Time Series Chart -a little help needed

2006-04-17 03:34

Hello fellow iReport users. Last week I started using the Time Series Charts in iReport. At first I was baffled at how to get data into these charts. But after playing around for a while I finally got to it.

I'm sorry, I don't have the time to write a detailed description of my actions as to get these charts 'running'. I actually figured it out by looking at the time series chart examples which are in the jasperreports 1.2.0 package, if my memory is correct.

Hope this will be of help to both of you!

Bye,

Mario

September 3, 2006

By: MussMan - mussman

variable field in a barcode?

2005-12-28 10:32

I'm relatively new to iReport and Jasper.

I'm creating a document that needs to convert an integer field to a barcode and print out on the report. When I design the report without the barcode, everything works just fine. But I can't figure out how to add the barcode in a way that will let me use a variable field for the barcode.

It will put a fixed numerical value in the barcode, but that doesn't do me any good. Is it possible to use a field to generate the barcode in iReport? Or will I have to code it in XML?

Thanks.

By: Hendry - hendrykho

RE: variable field in a barcode?

2006-04-12 04:31

Hi,

Could you tell me what is application identifier for?

September 3, 2006

By: antobuccia - antobuccia

show problem in pdf

2005-07-29 06:04

why the pdf preview in IReport does work ok, but when I use the same report and show it in pdf in another server, pdf cut some fields?

It depends on the system set-up or exists some parameters in IReport to use for avoid these kind of probles?

thank-u

By: -JE- - julegner

RE: show problem in pdf

2006-04-03 08:26

We have the same problem, and i think it happens when there is no arial font on the server. Then the server uses the font given as pdf-font, which can be bigger, if so, the text is sometimes to big for the textfield.

So try and put arial on the server.

September 3, 2006

By: roshansalvi - roshansalvi

How to pass a collection of Java object.

2005-03-27 23:30

I am using iReport. i want to pass collection of Java object to iReport so that it can print all the data. how should i pass the collection of java object and how should i print them..

Please help me out...

thanks in advance

By: xpert - jcox00

RE: How to pass a collection of Java object.

2005-03-28 12:40

As in the object that you're passing to the report is of the type java.util.Collection? Are you passing it in as a parameter or field from a custom data source?

By: Diogo Oliveira - diogosales

RE: How to pass a collection of Java object.

2006-04-03 04:32

Hi

I have exacly the same issue so I'll post it here. And yes, as for me, I'm passing a java.util.Collection from my own CustomDataSource. Inside the collection I have a small number of object of a custom type I developed. This object has something like a string and two integer fields. How can I generate a variable-size list of all the objects in my collection?

Thanks.

By: Diogo Oliveira - diogosales

RE: How to pass a collection of Java object.

2006-04-03 06:18

Also I have a getter for it (it's in a java bean) but it's not static and the collection varies with a given argument (actually, a bean attrribute). So this is impossible using bean data source, right?

September 3, 2006

By: Alceu Rodrigues de Freitas Jr. - glasswalk3r

using variables to calculate subtotals

2005-05-30 08:27

Hello,

I have a report that should show data like the example

below:

Group 1

----

Amount Unit value Total Value

-------------------------------

3 10 30

4 10 40

Subtotal: 70

Group 2

Amount Unit value Total Value

-------------------------------

4 10 40

5 10 50

Subtotal: 90

The problem is that I inserted all the data in the

"Detail" group, including the "Subtotal" line. I used

a variable to calculate the subtotal:

Variable name: subtotal

Reset Type: Report

Calculation Type: Sum

Variable Expression: $F{total_value}

Initial Value Expression: new Double(0)

The variable is not being "reseted" to zero as I would

like. I tried to use another types of "Reset Type" but

it is not working.

Everytime I execute the report, I get the first

"Subtotal" ok, but the next one will be the previous

value plus the next values. The final result is this:

Group 1

----

Amount Unit value Total Value

-------------------------------

3 10 30

4 10 40

Subtotal: 70

Group 2

----

Amount Unit value Total Value

-------------------------------

4 10 40

5 10 50

Subtotal: 160

There is any way to implement that in iReport? How

should I do it?

Thanks in advance

By: Giulio Toffoli - gt78

RE: using variables to calculate subtotals

2005-05-31 00:43

ResetType: Group

ResetGroup: Your group name

Giulio

By: GSantos - gureba

RE: using variables to calculate subtotals

2006-03-28 13:15

How to calculate a percentage of each detail in a subtotal, and the similar of each subtotal, example:

Product Qty Part%

A 25 83,3%

B 5 16,7%

SubTotal 30 33,3%

C 30 50,0%

D 30 50,0%

SubTotal 60 66,7%

Total 90

How can we implement this calculation? We tried to use different variables, with different evaluation times, but it didnÂ´t works.

Thanks,

Gustavo Santos

September 3, 2006

By: CHL2004 - chl2004

Does the Option in iReport work?

2005-02-08 12:31

When I make changes to the options (under Option menu) that are supposed to affect new documents, like defaulting values to pixel instead of cm, it doesn't seem make any difference. Same thing happen when I set a default template to be used in a new document. Does anybody have this problem?

By: frblusso - frblusso

RE: Does the Option in iReport work?

2006-03-24 08:23

Nobody has replied to that question, and today, i discover the same problem with the option 'default template', with ireport1.2.0.

is anyone has an idea?

September 3, 2006

By: Ionut Nedelcu - ionutned

Deleting a report band in iReport

2005-03-28 05:09

I tried to delete a band using iReport, but it is impossible. I also tried to delete it manually from the xml file, but when I load the design in iReport, it just adds it back.

Is it a bug or a feature?:)

By: Remo Fritzsche - remofritzsche

RE: Deleting a report band in iReport

2006-03-23 01:06

simply set the band hight (right-click -> band properties) to 0 and after changing the height of the band click into the textbox to confirm it...otherwise it won't be saved.

good luck

September 3, 2006

By: Theodore Watson - tedw_esc

Barcodes not appearing in JSP, no exceptions

2005-11-23 12:29

I'm using JasperReports 1.1.0 with iReports 0.5.2 to render html reports using a servlet. The ImageServlet from JasperReports is not returning barcode images. I included it.businesslogic.ireport.barcode.BcImage and barbeque-1.1.jar. Unfortuantely, no exceptions are being thrown. The only image coming out of ImageServlet is the px image.

Barcodes are rendering correctly in PDFs.

Does anyone know what I'm missing?

Thanks,

Ted Watson

By: Hendry - hendrykho

RE: Barcodes not appearing in JSP, no exceptions

2006-02-28 04:03

Hi,

I am sorry because i am not answering your question.

I have problem in rendering barcode in PDF's.

I have got exception below

net.sf.jasperreports.engine.fill.JRExpressionEval

Exception: Error evaluating expression : image_2

Source text : it.businesslogic.ireport.barcode.BcImage.getBarcodeImage(2

,$P{IMEI},true,false)

Could you tell me what do I miss?

I have included the iReport.jar.

Please help me. Thanks.

September 3, 2006

By: Shammi Hettiarachchi - shammif2

how to print a report

2005-12-16 04:21

how to print report directly without previewing it..

By: Remo Fritzsche - remofritzsche

RE: how to print a report

2006-02-16 06:04

you can turn the output directly into a directory without viewing it. if you start the report with a servlet, you can print the saved pdf directly with the servlet. after that you could remove it.

September 3, 2006

By: tolga gucuk - e111982

subreport screen shots.

2005-11-15 03:52

hi my friends.

can anyone who can manage subreport send me screen shots for the steps in main report and subreport. i only want to write subreport with a simple query. and a main one with no query and show the results of subreport in main report. main report is fully empty. all the times it says "the document has no pages" .

please help . in really confusion..

thanks.

By: Remo Fritzsche - remofritzsche

RE: subreport screen shots.

2006-02-16 00:51

Here a little example:

http://www.redbit.ch/public/screens.ireport/help/

The subreport.doc File. It's a little bit corupt but I had not much time to create this tutorial;)

Regards

Remo

By: Remo Fritzsche - remofritzsche

RE: subreport screen shots.

2006-02-16 01:38

arm...why you want to place a subreport in a empty main report?

September 3, 2006

By: tomuno - tomuno

I want make a table! Can I?

2005-03-21 22:24

table :

name | id | price ...

sex xx xx xxx

age xx xx xxx

use xx xx xxx

.

but the row and the line number both variable

!!!!!!!!!!!!!!!!SOSOSOSOSOSOSOSOSOSOS

By: Remo Fritzsche - remofritzsche

RE: I want make a table! Can I?

2006-02-15 01:47

place the variable data into the detail band. and for a dynamc number of colums try to use crosstabs.

crosstabs are supported sience iReport 1.1.0 and documented in the manual V 1.2

regards

Remo

September 3, 2006

By: Abhi - abgore

Configuring JRDataSourceProvider

2005-06-16 09:23

I am trying to configure the JRDataSourceProvider as my datasource but I keep on getting the "Chec your classpath" error.

I have configured the classpath and specified the JAR whcih has my datasource class.

Is there anything I am overlooking ?

By: Giulio Toffoli - gt78

RE: Configuring JRDataSourceProvider

2005-06-22 14:47

This problem is fixed in repository.

A workaround is put your classes in classes iReport directory.

Giulio

By: dhiller - dhiller

RE: Configuring JRDataSourceProvider

2006-02-07 04:25

We are facing the same problem with iReport 1.1.0.

Putting classes in iReport directory is unacceptable.

Can anyone point us to a patch or to a different solution?

September 3, 2006

By: jem11 - gigio11

Summary not alone in last page

2005-11-11 12:53

Hi everybody:

I have a report and sometimes the summary band is printed alone in the last page, how can i avoid that this happen? i want that if the summary is alone the elements in the past page "jumps" with the summary.

Gigio11

By: Andreas M?- amuelle1

RE: Summary not alone in last page

2006-02-06 05:28

Hello,

I've the same problem. If no detail has to be printet on last page the summary is printed alone without pageheader and pagefooter.

But I need the pageheader and pagefooter printet because every page has to look the same.

Anybody an idea what to do?

Thanks,

Andreas

September 3, 2006

By: Francisco - kjava2

I Need Help in this Exception

2005-07-13 04:01

Why I try to compile my report in iReport I am getting this exception:

Compiling to file... C:ProjetosSikGetXMLREP_RELACAO_COLETAS.jasper

-> C:ProjetosSikGetXMLREP_RELACAO_COLETAS.java

Error compiling the report java source!

java.lang.NoClassDefFoundError: org/eclipse/jdt/internal/compiler/env/INameEnvironment

at java.lang.Class.forName0(Native Method)

at java.lang.Class.forName(Unknown Source)

at it.businesslogic.ireport.IReportCompiler.class$(IReportCompiler.java:1178)

at it.businesslogic.ireport.IReportCompiler.getClassLoader(IReportCompiler.java:1178)

at it.businesslogic.ireport.IReportCompiler.run(IReportCompiler.java:412)

at java.lang.Thread.run(Unknown Source)

What is this?

Is it supposed to have the jdt-compiler.jar file in CLASSPATH? But in iReport I have the compiler option set to "JasperReport defaults".

Even though I put it there but sitll no success.

So, I beg you guys, does anyone know what should I do to compile my reports again? (It is very very important)

JDK 1.5

iReport 0.5.0

JasperReport 0.6.8

Thanks a lot

By: Andrey - andfedotov

RE: I Need Help in this Exception

2005-07-25 03:00

Well, seems that JasperReport defaults uses jdt-compiler.jar.

In IReport Options set 'Java Compiler' as Compiler for your reports.

In this case don't forget to put tools.jar from your jdk to IReport's folder.

Good luck!

Andrey

By: Susan - susancai

RE: I Need Help in this Exception

2006-01-19 21:14

I encountered same problem also in iReport0.5.3 and Java 1.5, JsperReport1.1.1.

Felt like "classpath" problem. the jdt-compiler.jar was in iReport/lib, and I copied tool.jar to iReport/lib also, but the problem still same.

same error msg as following:

Compiling to file... C:javaiReport-0.5.3worktest_1.jasper -> C:javaiReport-0.5.3worktest_1.java

Error compiling the report java source!

java.lang.NoClassDefFoundError: org/eclipse/jdt/internal/compiler/env/INameEnvironment

at java.lang.Class.forName0(Native Method)

at java.lang.Class.forName (Unknown Source)

at it.businesslogic.ireport.IReportCompiler.class$(IReportCompiler.java:1326)

at it.businesslogic.ireport.IReportCompiler.getClassLoader (IReportCompiler.java:1326)

at it.businesslogic.ireport.IReportCompiler.run(IReportCompiler.java:461)

at java.lang.Thread.run(Unknown Source) Compilation running time : 4

By: Susan - susancai

RE: I Need Help in this Exception

2006-01-24 00:09

Dear Giulio Toffoli,

I had tried to put tools.jar file into lib, the exception was still thrown when I compiled the report in iReport. (iReport0.5.3 and Java 1.5, JsperReport1.1.1. )

If we take a close look at the trail of startup.bat (by set echo on) , we can find that startup.bat add the jar files used into classpath and then call it.businesslogic.ireport.gui.MainFrame to run iReport.

The path I traced in startup.bat as following, which shown .libjr-bsh-compiler.jar was add in classpath, What's the cause of the exception being thown? (tools.jar is in c:javajdklib that was included in classpath)

Could you please delight me? I really could not be able to figure it out. Your help are great appreciated.

Thanks & Best Regards,

susan

----------------------------------------

java -cp "c:javajdkbin;c:javajdklib*.jar; c:javaiReportbin;c:javaiReportlib*.jar;

.classes;.libbarbecue-1.1.jar;.libbsh-1.3.0.jar; .libcommons-beanutils-1.5.jar; .libcommons-collections-2.1.jar;

.libcommons-digester-1.7.jar; .libcommons-logging-1.0.2.jar; .libcommons-logging-api-1.0.2.jar;.libgroovy-all-1.0-beta-10.jar;

.libhsqldb-1.61.jar;.libiReport.jar;

.libitext-1.3.1.jar;.libjasperreports-1.1.1.jar;.libjcmdline-1.0.2.jar;.libjcommon-1.0.0-rc1.jar;.libjdt-compiler.jar;

.libjfreechart-1.0.0-rc1.jar;

.libjr-bsh-compiler.jar;

.libjr-groovy-compiler.jar;.liblog4j-1.2.8.jar;.liblooks-1.2.2.jar;.libmysql-connector-java-3.1.11-bin.jar;

.libpngencoder.jar; .libpoi-2.0-final-20040126.jar;.libtinylaf.jar;.libxalan.jar;.libxercesImpl.jar;.libxml-apis.jar" -Xms24m -Xmx512m it.businesslogic.ireport.gui.MainFrame

By: Susan - susancai

RE: I Need Help in this Exception

2006-02-02 16:00

JDK and JRE were requested to be put at same folder (such as "c:program filesjava" by iReport. If put JDK and JRE under different directory, for example, jdk in c:javajdk while jre in c:program filesjava", the above exception will be thrown.

September 3, 2006

By: hanyou - hanyou

iReport 0.5.0 startup error message

2005-05-26 05:59

jdk1.5.0_03

iReport-0.5.0

run ireport.bat, but error message below

Exception in thread "main" java.lang.NoSuchMethodError

at it.businesslogic.ireport.gui.SplashDialog.initComponents(SplashDialog

.java:43)

at it.businesslogic.ireport.gui.SplashDialog.<init>(SplashDialog.java:18

)

at it.businesslogic.ireport.gui.MainFrame.main(MainFrame.java:6642)

By: cbrandt - dascjb

RE: iReport 0.5.0 startup error message

2005-05-26 06:46

I had the same issue after I installed oracle and it added the path to jdk1.3. It worked fine once I make sure my defualt java binary was jdk1.4. Make sure your java version you are using is NOT jdk1.3

By: janek - janekda

RE: iReport 0.5.0 startup error message

2005-05-30 04:02

I checked classpath,path,java_home.

This is OK. I have only SDK 1.4.2 and for all that iReport doesn't work.

thanks

By: janek - janekda

RE: iReport 0.5.0 startup error message

2005-05-30 05:38

this is result:

java version "1.4.2_08"

Java 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)

Java HotSpot Client VM (build 1.4.2_08-b03, mixed mode)

By: Giulio Toffoli - gt78

RE: iReport 0.5.0 startup error message

2005-05-30 12:27

janek, are you sure that the exception is the same ?

By: janek - janekda

RE: iReport 0.5.0 startup error message

2005-06-03 00:14

you're right, exuse me. Full error message is:

Exception in thread "main" java.lang.ExceptionInInitializerError

at jcmdline.FileParam.<clinit>(FileParam.java:147)

at it.businesslogic.ireport.gui.MainFrame.main(MainFrame.java:6560)

Caused by: java.util.MissingResourceException: Can't find bundle for base name j

cmdline.strings, locale cs_CZ

at java.util.ResourceBundle.throwMissingResourceException(Unknown Source

)

at java.util.ResourceBundle.getBundleImpl(Unknown Source)

at java.util.ResourceBundle.getBundle(Unknown Source)

at jcmdline.Strings.<clinit>(Strings.java:53)

... 2 more

By: janek - janekda

RE: iReport 0.5.0 startup error message

2005-06-03 04:07

Agrr,

I found error (or bug?). I put files into directory starting with "!" and this is error.

thanks

By: Giulio Toffoli - gt78

RE: iReport 0.5.0 startup error message

2005-05-30 05:00

try to open a command prompt and type:

java -version

Giulio

By: Taimur - taimoor

RE: iReport 0.5.0 startup error message

2006-01-30 03:59

I am using windows 2000, ireport 0.5.3, J2SDK 1.4.1_03 and JRE 1.4.2.

Open reports is already installed along with tomcat and both are running smoothly. When ever i click to run ireport.bat i get the following error.

Exception in thread "main" java.lang.NoSuchMethodError at it.businesslogic.ireport.gui.SplashDialog.initComponents(SplashDialog.java:44)

at it.businesslogic.ireport.gui.SplashDialog.<init>(SplashDialog.java:18)

at it.businesslogic.ireport.gui.MainFrame.main(MainFrame.java:6580)

Can some body guide me how to run succesfully ireport.

Regards,

Taimur.

September 3, 2006

By: hanyou - hanyou

iReport 0.5.0 startup error message

2005-05-26 05:59

jdk1.5.0_03

iReport-0.5.0

run ireport.bat, but error message below

Exception in thread "main" java.lang.NoSuchMethodError

at it.businesslogic.ireport.gui.SplashDialog.initComponents(SplashDialog

.java:43)

at it.businesslogic.ireport.gui.SplashDialog.<init>(SplashDialog.java:18

)

at it.businesslogic.ireport.gui.MainFrame.main(MainFrame.java:6642)

By: cbrandt - dascjb

RE: iReport 0.5.0 startup error message

2005-05-26 06:46

I had the same issue after I installed oracle and it added the path to jdk1.3. It worked fine once I make sure my defualt java binary was jdk1.4. Make sure your java version you are using is NOT jdk1.3

By: janek - janekda

RE: iReport 0.5.0 startup error message

2005-05-30 04:02

I checked classpath,path,java_home.

This is OK. I have only SDK 1.4.2 and for all that iReport doesn't work.

thanks

By: janek - janekda

RE: iReport 0.5.0 startup error message

2005-05-30 05:38

this is result:

java version "1.4.2_08"

Java 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)

Java HotSpot Client VM (build 1.4.2_08-b03, mixed mode)

By: Giulio Toffoli - gt78

RE: iReport 0.5.0 startup error message

2005-05-30 12:27

janek, are you sure that the exception is the same ?

By: janek - janekda

RE: iReport 0.5.0 startup error message

2005-06-03 00:14

you're right, exuse me. Full error message is:

Exception in thread "main" java.lang.ExceptionInInitializerError

at jcmdline.FileParam.<clinit>(FileParam.java:147)

at it.businesslogic.ireport.gui.MainFrame.main(MainFrame.java:6560)

Caused by: java.util.MissingResourceException: Can't find bundle for base name j

cmdline.strings, locale cs_CZ

at java.util.ResourceBundle.throwMissingResourceException(Unknown Source

)

at java.util.ResourceBundle.getBundleImpl(Unknown Source)

at java.util.ResourceBundle.getBundle(Unknown Source)

at jcmdline.Strings.<clinit>(Strings.java:53)

... 2 more

By: janek - janekda

RE: iReport 0.5.0 startup error message

2005-06-03 04:07

Agrr,

I found error (or bug?). I put files into directory starting with "!" and this is error.

thanks

By: Giulio Toffoli - gt78

RE: iReport 0.5.0 startup error message

2005-05-30 05:00

try to open a command prompt and type:

java -version

Giulio

By: Taimur - taimoor

RE: iReport 0.5.0 startup error message

2006-01-30 03:59

I am using windows 2000, ireport 0.5.3, J2SDK 1.4.1_03 and JRE 1.4.2.

Open reports is already installed along with tomcat and both are running smoothly. When ever i click to run ireport.bat i get the following error.

Exception in thread "main" java.lang.NoSuchMethodError at it.businesslogic.ireport.gui.SplashDialog.initComponents(SplashDialog.java:44)

at it.businesslogic.ireport.gui.SplashDialog.<init>(SplashDialog.java:18)

at it.businesslogic.ireport.gui.MainFrame.main(MainFrame.java:6580)

Can some body guide me how to run succesfully ireport.

Regards,

Taimur.

September 3, 2006

By: Uli - ukrebs

Page numbering new for each group

2005-12-22 00:52

Hi there,

look like i have a similar problem as "How to define numbering by group).

what i need is a new page number for each new group.

up to now i defined a variable PageNum; type is java.lang.Integer; calculation type count; reset type group; increment type page;

no problem to print the initial value

But: what is to set into "Variable expression" since after the first page i just get "null"

Thanks for help

Uli

By: Uli - ukrebs

RE: Page numbering new for each group

2005-12-22 01:59

solved; thank you

By: neu - mei_cheng

RE: Page numbering new for each group

2005-12-27 23:15

hi,

How can you solve it?

Thanks,

Neu

By: sagi7 - sagi7

RE: Page numbering new for each group

2006-01-26 06:59

and how did you solve it?

IÂ´m searching a solution for the same problem!

best regards

By: Uli - ukrebs

one solution: Page numb. new for each group

2006-01-30 02:10

Numbering for each group:

1.) create a new variable mypagenumber; type integer, reset type Group, increment type page, calculation type count; variable expression $V{mypagenumber}, inital value new Integer(0).

2.) put on your report a textfield type string, evaluation time page, Textfield expression String.valueOf($V{mypagenumber}) to give the actual page within the group or evaluation time group and select your group to give the pages within the group.

Have fun

Uli

September 3, 2006

By: kmkumar - kmkumar17

i18n problem

2005-11-12 00:20

Hi,

I am having problem with internationalizing my report.

Here is what I have done.

1) View-> Report Properties -> i18n -> Resource Bundle Base Name, I have entered

"LabelsReports".

2)View-> Internationalization->Local Files-> create local file, I just left the suffix field blank and irport created the dafault local file "LabelsReports.properties". In this I have added my label like "text.sectortitle=List of Sectors".

3) In the report title I refered this like "$R{text.sectortitle}"

The report displays the key itself like $R{text.sectortitle}" and not the value from resource bundle.

Am I missing something here?

Appreciate any help.

Thanks.

By: frblusso - frblusso

RE: i18n problem

2006-01-24 07:58

Hello

are you sure your field is a "textfield" and not a "static text" ? Look at the properties of the fied to verify.

if you have a static field, only the key is displayed. I've just had the same problem.

regards

September 3, 2006

By: kmkumar - kmkumar17

i18n problem

2005-11-12 00:20

Hi,

I am having problem with internationalizing my report.

Here is what I have done.

1) View-> Report Properties -> i18n -> Resource Bundle Base Name, I have entered

"LabelsReports".

2)View-> Internationalization->Local Files-> create local file, I just left the suffix field blank and irport created the dafault local file "LabelsReports.properties". In this I have added my label like "text.sectortitle=List of Sectors".

3) In the report title I refered this like "$R{text.sectortitle}"

The report displays the key itself like $R{text.sectortitle}" and not the value from resource bundle.

Am I missing something here?

Appreciate any help.

Thanks.

By: frblusso - frblusso

RE: i18n problem

2006-01-24 07:58

Hello

are you sure your field is a "textfield" and not a "static text" ? Look at the properties of the fied to verify.

if you have a static field, only the key is displayed. I've just had the same problem.

regards

Profiles

Forum

Events

Featured Visualizations

Knowledge Base

Documentation (PDF Downloads)

Blog

Documentation (Test Area)

Documentation

Dr. Jaspersoft Webinar Series

Downloads

Posts posted by 2005 IR Help

Products

Explore