in i report 1.2.5 , when placing lines in a detail band
the placement seems to be incorrect, according to the element properties
a horizontal line can be placed at "top =1"
trying to move it higher , puts it in the band above and sets it to red
but a vertical line can be placed at top="0" ZERO!!
also lines of 1 pixel are counted as being ZERO wide
. really lines cannot have ZERO width, and i don't much care if you offset positions from 1 or 0, but it should be consistent.
it's high because, the sooner it is corrected, the less incorrect reports are going into in the field