nageshit2011 Posted September 12, 2013 Share Posted September 12, 2013 Hi,In JasperServer, passing parameters to specific report through URL is working fine example: http://<host>:<port>/<context>/flow.html?_flowId=viewReportFlow&reportUnit=/supermart/Details/CustomerDashboard&customerID=4012where as in adhoc view same scenario is not working.Please help me.VV Nagesh Bodapati Link to comment Share on other sites More sharing options...
sivasubramanian.v Posted September 25, 2013 Share Posted September 25, 2013 Hi,Please use this for empeding dashboard http://<host>:<port>/<context>/flow.html?_flowId=viewReportFlow&reportUnit=/supermart/Details/CustomerDashboard&hidden_customerID=4012I hope it will help!Siva | HCL Link to comment Share on other sites More sharing options...
nageshit2011 Posted September 25, 2013 Author Share Posted September 25, 2013 For Dashboards & ireports its working fine. Only problem with adhocview-cross tabs. Any way thanks for ur reply. I have one more problem like "jasperserver 5.2 authentication with external DB". i done changes according to reference document but still it is referring jasper db. Link to comment Share on other sites More sharing options...
snehal_hibare Posted July 23, 2014 Share Posted July 23, 2014 Hi ,any solution for passing parameter to ad-hoc view ? I am doing somewhat same kind work.Need help Link to comment Share on other sites More sharing options...
shughes Posted January 11, 2016 Share Posted January 11, 2016 Was there ever any resolution on how to pass hidden parameters to ad-hoc views? Link to comment Share on other sites More sharing options...
jason.symons Posted May 14, 2017 Share Posted May 14, 2017 Hi, Not sure about dashboards and hidden parameters, but I was struggling pass a parameter into a report I had developed from an Ad Hoc view. I had a filter which I set up in the AdHoc view which I created the report from. This is the solution I found: - export the report (right click>export). - find the file: TopicJRXML in the zip file which downloads. - find the parameter name of the relevant filter. Its in the first few lines of the code. In my case the field displayed as 'record_id'......the parameter name was actually 'record_id4_1' - append the parameter to your URL using the name you found in the Topic file as follows (using my example): ......&record_id4_1=CRM-0000003 That worked for me. I haven't tried anything more complex like multi-selects or ranges, but I think it should work as per the guidance. Its just about finding the correct parameter name. Unfortunately it doesn't tell you when you have the URL wrong, just defaults to the saved version of the report, which I suppose is useful in some ways but not that helpful when trying to get this right. Hope that helps, might point you in the right direction! Thanks Jason Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now