Jump to content
JasperReports Library 7.0 is now available ×
  • This documentation is an older version of JasperReports Server Ultimate Guide. View the latest documentation.

    Repository HTTP API

    The HTTP interface provides an easy way to implement the API for accessing repository objects. However, the HTTP interface can't be embedded the way the web services and Visualize.js APIs can be in non-Jaspersoft applications. Rather, the HTTP interface is used primarily as shortcuts or entry points to commonly used features or content. Typically, the HTTP interface is accessed programmatically by generating the URL that returns HTML that displays either the desired object (in the case of report execution and repository URLs) or the content of repository objects (such as report output in the form of content resources).

    As shown in the following examples, the major entry points are:



    The examples in this section are generalized to describe both the community and commercial editions of JasperReports Server. For simplicity, this section refers to the deployment context generically. For example:


    With the default deployments, the <context> refers to:

    jasperserver-pro in the commercial editions
    jasperserver in the community project

    General Parameters

    The following parameters can be used for any URL that points to a JasperReports Server web page. The parameters are specified as standard HTTP GET parameters (that is, they're in the form name=value and are separated by ampersands (&)). For dashboard URLs in JasperReports Server 6.0 and 6.0.1, general parameters must be placed before the # sign.

    userlocale – specifies the locale of the user. It can be added to the startup URI, as in this example:


    j_username and j_password – pass the credentials to authenticate a user with the server. The user name must correspond to a valid user, and j_passwordmust be the user password (in clear text).

    If you use a commercial edition and host more than one organization, the organization ID or alias must be passed along with the user ID as part of the j_username parameter. The format for a user in an organization is j_username=userID|orgID.

    If the credential parameters are not present, no authenticated server session exists, and the server is not configured to use automatic authentication (such as single sign-on), the server prompts the user for a user name and a password then redirects the user to the requested page. These authentication parameters let the user skip the login page and directly access a specific page.

    theme – specifies a theme to use for the JasperReports Server interface. Once a theme has been set, it remains the default until the user log outs, the session ends, or another theme is set.
    decoratedecorate=no removes the page headers, footers, and borders from the requested page. Page titles are not removed. Default is decorate=yes.
    sessionDecoratorsessionDecorator=no removes the page headers, footers, and borders from the JasperReports Server user interface for the entire user session. Once sessionDecorator has been set (yes or no), the setting remains the default until the user log outs, the session ends, or sessionDecorator is called again. As with decorate, page titles are not removed.


    You can also remove decorations using a custom theme. See Using Themes to Remove Branding for more information.

    _opt – turns optimization on and off for the current page. You can use _opt=no to view a page without optimizing it when developing and testing JavaScript customizations. _opt is not recommended for production systems. See Customizing JavaScript Files for more information about JavaScript optimization.

    Executing ReportUnits

    The following sections provide examples and details about URLs that execute reports.

    Simple Report Execution

    The HTTP interface can execute and export reports within the JasperReports Server web application.

    The following example calls a report with no parameters and exports to the default format (HTML):

    The URL is:


    This is the simplest possible report execution URL. The following section explains more advanced options.

    Passing ReportUnit Execution Parameters

    Reports support the following types of parameters:

    General parameters supported by all URLs, such as theme or userLocale.
    Reserved report parameters such as output or reportLocale.
    Input control parameters, described in Input Control Parameters for Reports and Dashboards.

    The following example executes the same report as the previous section, but also passes 7 as an input control parameter and exports to PDF instead of HTML:


    Note the URL parameters:

    &startMonth=7 indicates that the value 7 should be passed to the input control called startMonth. The report returns data starting in July.
    &output=pdf indicates that the output should be generated in PDF format.

    If the report parameter supports multiple values, you can specify them using the ampersand (&); for example:

    The report execution parameters can either be reserved parameters the server uses to determine general attributes of the report execution, or arbitrary parameters that correspond to the report’s input controls/parameters. The parameters are specified as standard HTTP GET parameters (in name=value form and separated by ampersands (&)).

    Reserved Report Parameters

    The following reserved report parameters are recognized by JasperReports Server:

    reportUnit – specifies the URI of the report unit in the repository.
    output (optional) – specifies the output format. Values for this parameter are keys for the report exporters configured in the server. By default, the server recognizes the following output types: pdf for PDF, xls for Excel (Paginated), xlsNoPag for Excel, xlsx for XLSX (Paginated), xlsxNoPag for XLSX, rtf for RTF, csv for CSV and swf for the Flash report viewer. When this parameter is not specified, the default format is HTML displayed in the report viewer.
    reportLocale – specifies the locale where the report should be executed. A locale is passed as code consisting of a lower-case two letter ISO-639 language code, followed by optional upper-case two letter ISO-3166 country code and a locale variant, separated by underscore (the format is identical to the standard Java locale programmatic names).
    pageIndex (optional) – specifies the initial page to be displayed when launching the target report. The page index is 1-based. If a negative page index or a page index greater than the number of pages in the report is used, the report opens at the first page. This parameter is effective only for HTML output.
    anchor (optional) – specifies the name of an anchor from the target report at which the report should open. If an anchor with the specified name is not found in the report, the first page of the report is shown. The parameter is effective only when pageIndex is not specified and when the output is HTML.

    Executing Dashboards

    As of JasperReports Server 6.0, dashboards don't use the flow.html entry point used by Spring Web Flow. Instead, they use an updated dashboard entry point.


    If you're working with legacy dashboards created in versions before 6.0, dashboards work similar to reports.

    The following example opens a dashboard for viewing:


    To open a dashboard for editing, call the Dashboard Designer:



    The dashboard Resource URL must go after the hash sign (#). This syntax supports faster page refreshing. When you save a new or existing dashboard, only the URL segment after the hash sign is reloaded.

    Passing Dashboard Execution Parameters

    Dashboards support the following types of parameters:

    General parameters supported by all URLs, such as theme or userLocale.
    The reserved dashboard parameters viewAsDashboardFrame and dashboardResource
    Input control parameters, described in Input Control Parameters for Reports and Dashboards.

    As of JasperReports Server 6.1, you can use non-authentication parameters before or after the hash sign (#). However, if you place general parameters after the hash sign, then on Dashboard Viewer load, the parameters are moved before the hash sign and the page is redirected to the resulting URL. The authentication parameters j_username and j_password cannot be redirected; they must appear before the hash sign.

    For example, suppose you enter the following URL:


    When you go to the Dashboard Viewer, you are redirected as follows:

    Reserved Dashboard Parameters

    The following reserved dashboard parameters are available:

    viewAsDashboardFrame (optional) – displays the dashboard without any decoration. This setting is similar to decorate=no, but hides the dashboard viewer toolbar in addition to the page headers, footers, and borders. You can use viewAsDashboardFrame when you embed your dashboard in another webapp. For example:
    dashboardResource (optional, deprecated) – supports earlier versions of JasperReports Server dashboard execution URLs. Use only for backwards compatibility.


    When your application uses this format, JasperReports Server automatically redirects it to the new dashboard viewer format. For example, the URL above would be redirected to:


    Input Control Parameters for Reports and Dashboards

    In addition to the standard parameters, report and dashboard execution URLs can contain parameters that provide values for input controls/parameters. The URL parameter names must match the name of the corresponding input control. The values used for such URL parameters depend on the type of input control:

    For filters or simple single value input controls, the value is a URL parameter value:
         If the type of the input control is text, the URL parameter value is directly used as the input control value.
         If the type of the input control is numeric, the URL parameter value is the numerical value formatted according to standard rules, using a period (.) as the decimal separator.
         If the type of the input control is date or date/time, the URL parameter value is the date/time value formatted as described in the jasperserver_config_<locale>.properties file for the current locale. See the JasperReports Server Administrator Guide for more information on formatting date and time. The following table shows the formats for the default locale.

    Input Control Type

    URL Parameter Format






    yyyy-MM-dd 'T' HH:mm:ss





    For Boolean (check box) input controls, the URL parameter value is either true or false.
    For input controls that refer to static list of values, the URL parameter value is the key/value of the list entry. For example, to select the first value in a list called ListInput, use the parameter &ListInput=1.
    For input controls that rely on a query, the URL parameter value corresponds to the query key/value column. For example, to set a query-based control to the value l_meade, use the parameter &QueryInput=lmeade.
    For multi-value input controls, multiple occurrences of the same URL parameter can be used. For example, parameter=value1&parameter=value2&parameter=value3.
    You can use the following special values for input controls:
         no value – when a string parameter is called with no value, it finds all instances where the string is empty, for example, &Country=. When the database result set does not include an empty string value, this URL input is ignored.
         ~NULL~ – finds NULL value. For example, &Address=~NULL~ returns all records with a NULL address. When the database result set does not include any NULL values, this URL input is ignored.
         ~NOTHING~ – depends on the form of the input control:
    For an input control that supports multi-selection, ~NOTHING~ clears the current selection and resets the input control to all values. (The generated SQL query in this case is 0=0, which essentially omits the filter.) For example, consider a multi-value input control named MultiInput. By default, this parameter is a list of two values. To override this list of values with another set of two values, you could use the parameter &MultiInput=item1&MultiInput=item2, where item1 and item2 are the overriding list values. To override the default with an empty list, use the parameter &MultiInput=~NOTHING~.
    For a single-select, non-mandatory input control, ~NOTHING~ selects --.
    For a single-select, mandatory input control, ~NOTHING~ selects the default value.

    If the parameter values included in a report or dashboard execution URL are not valid (for example, if a required parameter is missing or a parameter value is not valid), the user is prompted with the input controls so they can correct the values.

    Linking to Content

    The HTTP interface can return generated content saved to the repository in PDF, HTML, Excel, or RTF format.

    The following example links to a PDF file stored in the repository:


    Viewing Resources in the Repository

    The following example displays all resources saved in the /public/Samples/Reports folder in the repository:


    The following example displays all resources of type olapview (analysis view) saved in all folders in the repository:

    User Feedback

    Recommended Comments

    There are no comments to display.

    This is now closed for further comments

  • Create New...